LED Display Board For Advertising P3 High Definition Long Expected Lifespan
1.Product introduction
About led display board for advertising P3 high definition long expected lifespan,which is a high resolution screen,it is not only suitable for advertise,like education industry,which is a new type of education all-in-one machine.In a company,it is a meeting room system.In subway,airport,or train station,it is a control system.The following is the details parameter.
2.Product parameter
Product Name |
P3 full color led display |
Product Model |
IF-3 |
Pixel Pitch |
3mm |
Pixel Density |
111,111dots/㎡ |
Led Configuration |
SMD2121 |
Scan mode |
1/16 |
Module Size |
192x192mm |
Module Resolution |
64*64 |
Panel size |
Customized |
Service type |
Front service |
Brightness |
1000nits |
Viewing Angle |
Vertical 140°, Horizontal 140° |
Viewing Distance |
>3 meter |
Frame Rate |
60Hz |
Refresh Rate |
1920Hz |
IP Grade |
IP31 |
Input Voltage |
AC200-240V 50Hz |
Max. Power Consumption |
800W/㎡ |
Avg. Power Consumption |
350W/㎡ |
Working Temperature |
-20~40℃ |
Working Humidity |
10%-90%RH |
Out Of Control Rate |
1/10,000, Zero before delivery |
Expected Lifespan |
100,000 hour |
3.Product details
Product name |
Indoor full color P3 led display |
Viewing distance |
>3meter |
Density |
111111dots/㎡ |
Cabinet size |
Custom |
Cabinet material |
Iron special finish |
Service |
Front service |
High light |
Indoor led advertising,led video wall |
4.Product features
1. Good quality images: By utilize highly uniform led chip and good design of electric wire in the PCB board, more IC is instated to process the details of the video, we present a much better image quality.
2. High contrast rate. Only the high lumen and matt black surface led lamp will applied in our product to enhance the contrast rate.
3. High refresh rate. 1920Hz and 3840Hz refresh rate is optional according to your demand, 3840Hz refresh rate for TV broad casting grade application, 1920Hz for indoor meeting application.
4. 140° Super wide viewing angle.
5. Uniform color display.
5.Installation
1. Set up the back structure and set tup the screen.
2. Fix the simple cabinet to the structure one by one.
3. Put the P3 led module to the cabinet.
4. Adjust the flatness and seam between modules.